Deionized Water
Deionized Water 55 Gallon Drum
Our high purity deionized water is made through the process of ion exchange to remove nearly all ionized minerals and salts (both organic and inorganic) .
Our Deionized water starts as a high quality water, then is produced through filtering in a top quality cartridge filter, sent through a carbon filter, and dual ion exchange units, and run through a UV system, and then final filtered at 0.2 µS/cm.
The deionized water conforms to typical Type II Water specification.
- Resistivity is < 2 mega ohms.
- Conductivity is < 1 uS/cm.
- Total Organic Carbon (TOC) < 50 ppb.
- Sodium < 5 ppb.
- Chloride < 5 ppb. Silica < 3 ppb.
DI Water shelf Life is typically 24 months depending on the storage conditions.
Always manufactured from a good quality water. Our deionized water is Intended for industrial applications, basic lab use (washing beakers) and other typical and suitable uses) , manufacturing where specifications are met.. It is very useful for blending in to use in HVAC systems, and also to make high quality cosmetics, higher quality shampoos, hard surface cleaners and manufacturing many other products where this water will conform and will meet specifications desired for the end use.
Using DI Water produces a better, higher quality product.
Deionized High Purity Waters are used in a wide variety of applications that require a completely neutral water that will not effect the final product as well as being free of any all contaminates.
We provide a certificate of conformance for the product. If your requirement will need a Certificate of Analysis, or ASTM testing, or any testing for a specific element, email us the specifications and we can quote you. Depending on demand - there may be a 3 day lead time for drums of deionized water.
Ships by LTL FREIGHT. We need to know if you have a dock, forklift.
Ships in a new 55 Gallon Plastic Drum with 2 Inch Bung Openings.
Note: Water degradation may occurs quickly if not stored tightly sealed.
Formulations using D.I. Water:
Product Code, Chemical Name and CAS No.
- Chemical Name: Water
- CAS no: 7732-18-5
Specifications
- Appearance: Clear Liquid
- Color: Colorless
- Odor: Odorless
- Melting/Freezing Point: 32°F (0°C)
- Initial Boiling Point: 212°F (100°C)
- pH: 7 - 7.4
- Molecular Weight: 18.02
- Specific Gravity: 1 @20°C
- Formula: H2O
Use in Cosmetics and Shampoo Crafting
Deionized water is useful in blending higher quality shampoos, hard surface cleaners and manufacturing many other products where this water will conform and will meet specifications desired for the end use. Using DI Water produces a better, higher quality product.
Storage
Store away from incompatible materials in a well-ventilated place. Keep container tightly closed and locked up. Store in accordance with local/regional/national/international regulations.