Wrap-It-Heat, AGM-55 120V Model Drum Heater is specifically designed for heating materials with good receptivity. Lard, tallow and other fats are some examples of products heated and warmed with the AGM-55 120V.
The AGM-55 120 V heater utilizes a thermostat bulb to sense the temperature in an area from the active heating element. You have the choice of two thermostat ranges: HIGH, 200°F to 400°F and LOW, 60°F to 250°F.
The three heat switch allows three wattage settings per thermostat setting and voltage rating. They are HIGH: for maximum watts; MEDIUM: for ½ maximum watts; and LOW: for ¼ maximum watts. AGM-55 comes with a spring loaded toggle clamp for a snug fit to drum, a six foot power cord and three pin plug for grounded electrical operations. AGM-55 is to be used on METAL drums only. AGM-55 cannot be used on plastic, plastic lined or fiber drums.
Each AGM-55 Model drum heater is equipped with (1) three heat switch and (1) thermostat. Depending on which model you purchase, this will either be LOW range or HIGH range temperatures.
LOW range is 60°F-250°F. or HIGH range is 200°F-400°F. Look at the melt point of what you need to heat to determine whether you need the "Low Range" or the "High Range" heater. .
The WRAP-IT-HEAT Model AGM--55 120 V Drum Heater is U.L. Listed and C.S.A. Certified.
|Shipping weight||15 lbs. (Approx.)|
|Operating Voltage||120V AC|
|Output||120 Volts AC/1750 Watts (5,971 Btu/Hr)|
|Thermostat Range||60°F-250°F (Low Range) or 200°F-400°F (High Range)|
|Amperage||14.6 Amperes at 120 Volts|
|CORD 6' NEMA 5-15|
|INDOOR USE ONLY.|
ALWAYS READ INCLUDED INSTRUCTIONS INCLUDING ALL WARNINGS.
THE DRUM HEATERS ARE NOT WATERPROOF. DO NOT LET THE DRUM HEATERS GET WET
DO NOT LEAVE DRUMS WITH HEATERS ON UNATTENDED