FOAM BUST 10 Silicone Defoamer

Contact Us - contact@thechemistryconnection.com

(No reviews yet) Write a Review
FOAM BUST 10 DEFOAMER
ANTIFOAM AND FOAM CONTROL

Excellent, Handy Size to use in your small to medium size defoaming, and antifoaming situations.
Use in foamy fountains, water treatment, wastewater treatment, pools, spas, carpet cleaner water extraction machines (dilute 3 to 1 first) , chemical blending, etc..Anywhere you have a foam control problem where a silicone emulsion type product will work
Easy to use. You can use right out of jug, or dilute in to a sprayer or add 1:1 in to a small pump bottle.
Customers love FOAM BUST 10
FOAM BUST 10

Appearance Milky-white emulsion Active Ingredient Content 10% by weight
Specific Gravity, 25/25°C 0.98 Viscosity at 25°C (after stirring), cP 2000

Emulsifier Type Nonionic
Shelf Life - 12 months if stored in a cool, dry area and kept unopened.
FOAM BUST 10 is an easy to use defoamer/ antifoam system.
Use FOAM BUST 10  to defoam , prevent foaming in industrial and wastewater applications, fountains that have been "soaped" and are foaming, etc...
Use Foam Bust 10 Defoamer, Antifoam, anywhere you have a foam control problem

This is a technical grade defoamer. It is not for use in cooking applications except where the process is not regulated (by-products, animal food / animal feed processing for example
Foam Bust 10 is an easy to use  silicone emulsion based defoamer, anti-foam product. 

Typical Directions/ Instructions:

Use as - is right out of the jug. Or add in to a sprayer bottle or sprayer jug


Foam Bust 10 is easily dispersed manually as needed, or it can be fed in to your system by way of common pumps, on a continuous feed cycle.  It

used to control all types of foaming problems in fountains, wastewater systems, pools, - and anywhere foam is a problem and a good quality

silicone emulsion system can be used


Product Usage - Use Foam Bust 10 antifoam as received, or dilute first with water or process liquid


Dilution: Mix 3 to 10 parts of diluent to 1 part antifoam; stir gently until a uniform mixture is reached

 

When evaluating Foam Bust 10 antifoam we recommend that 300-500 ppm of as-received product be evaluated initially, and adjust use levels according to the observed performance.  In waste water and chemical processing operations, 10-20 ppm of as-received product should be the initial evaluation level. Adjust usage levels per observed performance. Adjust as necessary as loads and production changes to maintain performance.

Not Regulated/ NON DOT Regulated Type product.