Wrap-It-Heat Drum Heater Model TRX-55 120 V

$384.99
(No reviews yet) Write a Review
Shipping:
Calculated at Checkout

 WRAP-IT-HEAT® Model TRX-55 Drum Heater and warmer 120 V

The WRAP-IT-HEAT® Model TRX-55 120v Drum Heater and warmer is a thermostatically controlled drum warmer and heater with a three heat switch.

The Model TRX-55 Drum Heater is for standard 55 gallon METAL drums only.  The TRX-55 120 V  cannot be used on any plastic, plastic lined or Fiber Drums.


Model TRX-55, 120 V from Expo Engineered,  is designed for heating any materials with GOOD HEAT RECEPTIVITY. You should not be heating heat sensitive materials with a Model TRX-55

It works by a thermostat bulb sensing temperature in an area remote from the active heating element.

Each TRX Model drum heater is equipped with (1) three heat switch and a  thermostat (1). The three heat switch is provided to allow you to heat materials that  cannot be damaged by heat. When heating materials such as honey or similar materials which can char by excessive heat, the switch must be turned to LOW only. Test first. 

LOW. setting reduces the input wattage to 25% of the heaters capability and allows you to heat non-flammable, viscous materials without ruining them.

The MEDIUM setting will generate 50% of the heaters capability. This setting is used for less viscous materials.

The HIGH setting naturally will generate the heaters total capability. This setting is used on non-flammable material which as the ability to absorb heat very rapidly such as non-flammable oils, water oil mix, water, etc.

  You have the choice of two thermostat ranges: "LOW RANGE" which is 60 F to 250 F or "HIGH RANGE" which is 200F to 400 F. Select "Low Range" or "High Range"  when you put this in your cart. You'll choose based on the melt points of what you are heating with the unit. 

Equipped with spring loaded toggle clamp for snug fit, 6 foot
power cord and high ampere three pin plug.

120V operation, use NEMA 5-20 Outlet. 

The 240V operation, using NEMA 6-15 Outlet is listed here  

FOR INDOOR USE ONLY.

TRX-55 120V is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a
NON-HAZARDOUS area. This is for commercial/. industrial use. We do not recommend this for home use. 

The WRAP-IT-HEAT® Model TRX-55 Drum Heater is U.L. Listed and C.S.A. Certified.

6 ' Cord 3 prong

SPECIFICATIONS-                                                        

  • Diameter ..................................................22-1/2"
  • Shipping weight ........................................14 lbs. (Approx.)
  • Operating Voltage..............120V AC Single Phase
  • Power Output.................1,920W @ 120V           
  • Thermostat Range...................60°F to 250°F or 200°F to 400°F         
  • Amperage ..................16 A at 120 V
  • Cord .................6'

Cord with NEMA 5-20 plug     

ALWAYS READ INCLUDED INSTRUCTIONS INCLUDING ALL WARNINGS.

THESE HEATERS ARE NOT WATERPROOF. DO NOT LET THEM GET WET 

DO NOT LEAVE DRUMS WITH HEATERS ON UNATTENDED