Blooming Bath Powder

NATRASORB® BATH starch is an oil-absorbing hydrophilic starch that is highly water soluble and is not chemically modified. NATRASORB BATH starch allows this Blooming Bath Powder to leave a soft conditioning feel on the skin. It blooms when added to bath water and dissolves quickly without leaving a residual film on tub.


IngredientWt, % (as is)
Phase A 
Extra Virgin Olive Oil 3.0
Safflower Oil 13.0
IPM Isopropyl Myristate 5.0
Coconut Butter 0.25
Rice Bran Oil 0.50
Castor Oil 2.0
Fragrance Oil (your choice) 1.25
Colorant (your choice, Lakes or Micas)  
Phase B 
NATRASORB BATH Starch Tapioca Starch 75.00
Total 100.00

Mixing Procedure

Combine Phase A until uniform. Place Phase B in a mixer or blender and blend until combined.

Spray or disperse Phase A onto Phase B while mixing with whisk. Mix until uniform and then package.


Add SLSA powder to make it bubble!

Physical Properties

pH Not measured
Viscosity Not measured

All information concerning our products and/or all suggestions for handling and use contained herein (including formulation and toxicity information) are offered in good faith and are believed to be reliable. However Chemistry Connection makes no warranty express or implied (i) as to the accuracy or sufficiency of such information and/or suggestions, (ii) as to any product’s merchantability or fitness for a particular use or (iii) that any suggested use (including use in any formulation) will not infringe any patent. Nothing contained herein shall be construed as granting or extending any license under any patent. The user must determine for itself by preliminary tests or otherwise the suitability of any product and of any information contained herein (including but not limited to formulation and toxicity information) for the user’s purpose. The safety of any formulations described herein has not been established. The suitability and safety of a formulation should be confirmed in all respects by the user prior to use.